Home>Technical Data>FAQ
Fig.1 Example of noise filter
COPYRIGHT(c) 2006 COSEL CO., LTD. ALL RIGHTS RESERVED.
Frequently Asked Questions
Q.What is EMI filter recommended for DC-DC converter?
Fig.1 shows external noise filter which reduce the line conducted noise for DC-DC converter.
Fig.1 Example of noise filter
Table 2.1 cable list
| No. | Parts No. | Components | Note |
| 1 | C1 | Ceramic capacitor | Low impedance (recommended value: 4.7uF) |
| 2 | C2 | Electrolytic capacitor | Low impedance (please see instruction manual on catalogue) |
| 3 | C3 | Ceramic capacitor | Low impedance (recommended value: 4.7uF) |
| 4 | C4 | Ceramic capacitor | Low impedance (recommended value: 1000pF) |
| 5 | L1 | Common mode coil | High leakage inductance (recommended: main 14mH, leakage 240uH) |
The wiring method, the component's location or some other conditions are effect on line conducted noise. Please evaluate under end-use condition before using.
* Please consider about C4. The permeation noise from input to output will be increased by C4.
* Please consider about C4. The permeation noise from input to output will be increased by C4.
| Home | What's New | Product Information
| Product Selector | Technical Data |
| Company Profile | Financial Report | Environment | Contact us | Site Map |
| Company Profile | Financial Report | Environment | Contact us | Site Map |
COPYRIGHT(c) 2006 COSEL CO., LTD. ALL RIGHTS RESERVED.
Japanese