Home>Technical Data>Caution For Safety And Products

SAFETY | PRODUCTS 1 | PRODUCTS 2
Therefore, power supplies should have a special care depending on an operating environment.

COPYRIGHT(c) 2006 COSEL CO., LTD. ALL RIGHTS RESERVED.
CAUTION FOR SAFETY AND PRODUCTS
SAFETY | PRODUCTS 1 | PRODUCTS 2
PRODUCTS 1
Generally, switch mode power supplies are designed to operate at controlled environment (e.g. inside the office).Therefore, power supplies should have a special care depending on an operating environment.
♦1. Environment where some measures need to be taken
(1)Water/Humidity
When the unit is operated where water drops into the power supply, it may cause failure.In this case, please arrange water proofing. |
![]() |
(2)Dust
When the unit is operated at dusty place,it sometimes causes failure of fan.In this case, please consider about dust proof measure. |
![]() |
(3)Gas
When the unit is operated in an atmosphere with corrosive gas, it may cause failure.
|
|
![]() | |
♦2. Measures
To take measures below is suggested when units are used in the environment above.- Using units in the environment where units get watered or humidity is very high.
(1)Semi-standard C(coating)
(2)Stronger type than semi-standard C(Minor changed unit)
- Using units in the environment where something conductive is dropped into a unit.
(1)Install air filter to an exhaust part.
(2)Semi-standard C(coating)
(3)Stronger type than semi-standard C(Minor changed unit)
1.Attaching tube and silicon rubber to high voltage part.
2.Attaching isolation cover to high voltage part.
- Using units in the environment where some gas get into units.
(1)Some corresive gas cause units to be failed.Please contact us.
| Home | What's New | Product Information
| Product Selector | Technical Data |
| Company Profile | Financial Report | Environment | Contact us | Site Map |
| Company Profile | Financial Report | Environment | Contact us | Site Map |
COPYRIGHT(c) 2006 COSEL CO., LTD. ALL RIGHTS RESERVED.


